Looking for your other tickets?
Sign In or register for an account for the best experience on our help desk.
Sign In or register for an account for the best experience on our help desk.
Hi.
Great that you have made a Edge driver for the Smartthings hub.
It worked more or less straight forward for me.
I have used the ZXT-120 throught the Zipato controller, just migrated to ST now.
I have one issue, I do not find out how to make the “learning” function in the driver to work, and if learning is working, how do I use what`
In Zipato I hit a “learn” button, pushing the button at ZXT-120 once, and then pushing the button on the remote to be learnt. Voila, working… Here I`m struggling. A lot of functions in the Z-wave modules are not transfered to the ST system, that`s a pitty. Any thoughts?
To describe the essence of it:
1. Do the "learn" function in the driver work?
2. Where to I find what`s learnt, in Smartthings hub (to put it in a scene, or have a button to push).
3. Are you going to put more functionality into the Edge driver?
Great that you have made a Edge driver for the Smartthings hub.
It worked more or less straight forward for me.
I have used the ZXT-120 throught the Zipato controller, just migrated to ST now.
I have one issue, I do not find out how to make the “learning” function in the driver to work, and if learning is working, how do I use what`
s learnt?
My heat pump is running all year around, when Im home, its running at for instance 23 deg C, but when leaving home for a while, I have been used to just running the scene “leaving home”, and the only signal sent throught the ZXT-120 has been the “save function” putting the heat pump into “winter modus”, 10 deg C.In Zipato I hit a “learn” button, pushing the button at ZXT-120 once, and then pushing the button on the remote to be learnt. Voila, working… Here I`m struggling. A lot of functions in the Z-wave modules are not transfered to the ST system, that`s a pitty. Any thoughts?
To describe the essence of it:
1. Do the "learn" function in the driver work?
2. Where to I find what`s learnt, in Smartthings hub (to put it in a scene, or have a button to push).
3. Are you going to put more functionality into the Edge driver?
Created by 
Geir Peder Bøe
Geir Peder Bøe
which edge driver do you use now？I think someone already add learn function into ST from SmartThings community. as far as I know we have not made for ZXT-120 since this model was already end of life long ago. we do have for ZXT-600.
Hi.
I am using this Edge driver: https://drive.google.com/file/d/1nOxsN0zojSdNPg6d6c41iBgTWxwugiWu/view?usp=share_link
As you can see, it say its a learning function in it.
Brgds.
Geir
I am using this Edge driver: https://drive.google.com/file/d/1nOxsN0zojSdNPg6d6c41iBgTWxwugiWu/view?usp=share_link
As you can see, it say its a learning function in it.
Brgds.
Geir
I believe it can use learning function because we had tested it. I think the major reason is that ST always change its frame in different version so this edge driver cannot fully match.