Frequently Asked Question

ZXT-310 supports external IR emitters, but there is no response on the IR emitter socket, why?
Last Updated 6 years ago

Key Words: ZXT-310 IR emitters IR Port Mapping


You should make sure your selected IR port output is same as your configuration; please refer to “IR Port Mapping” section. ZXT‐310 supports two IR power levels for the external IR emitter to avoid saturation of the IR receiver. You can set the IR output power level by the Parameter Table value (normal or high power mode) or adjust the position of your external IR emitter.

Please Wait!

Please wait... it will take a second!